Accessoires et Pièces
Bontrager's Interchange ANT+ Cadence Sensor is a cadence sensor that wirelessly transmits your data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately). It includes a 5mm crank cadence band magnet and a silicone mounting strap to fit most chainstays, making installation a snap.
Product details - Provides infinite angle adjustment allowing for your preferred computer placement - Compatible with 31.8mm handlebars
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Symmetry is a beautiful thing. This RideCase mount brings everything in line, front and center to offer easier viewing of your device, a perfectly centered video frame, or a light beam cast in the center of your route. Attaches to 31.8mm diameter handlebars and the QuickClick holder can be rotated for both portrait and landscape orientation. The included sport camera adapters are compatible with different sport cameras like GoPro Hero series, Sony Action Cam series, Shimano Sport Cameras, and Garmin VIRB X / XE. Includes G-Ear Adapter for Garmin cycle computer. - Material: Forged aluminum / Engineering grade plastic - Bracket: For Handlebar (fits 31.8mm) - Max Load: Sport camera 200 g / 7.04 oz - Added Features: Angle adjustment (Sport Camera) Rotates for landscape or portrait viewing (RideCase) - Compatible with RideCase series & PanoComp X Includes T15 wrench - Size: 11 x 6.6 x 4.7 cm / 4.3” x 2.6” x 1.9” (Center Mount only) - Weight: 36 grams
With this Tacx wireless ANT+ receiver for Android devices with a micro USB port, you can connect to devices that communicate via ANT+. For example a heart rate meter, speed and cadence sensor, sports watch, GPS device or bike computer. This enables you to keep track of your performance continually. It also allows you to link an ANT+ trainer to the Tacx Cycling app (tablet) or Tacx Training app (smartphone), or connect an older model Tacx trainer which only has ANT+ to your telephone, so you can train with the Tacx Training app and Tacx Cloud. The device you want to connect must have a micro USB port and Android 4.3 or higher. This ANT+ dongle is only compatible with devices that have USB On-The-Go.
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training. - Suitable for handlebars with a diameter ranging from 26mm to 35mm - Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
Don't miss out on any action! The Tacx GoPro bike mount can be placed on the handlebar or saddle to record everything that happens in front or behind you. Installing the bracket on your bike is very simple. After placing the mount on your bike, you can insert the camera into the holder easily and quickly and you are ready to record. - Easily switch between mounting options - Handlebar adapter can be used on road or mountain bikes - Saddle adapter works with 7mm and 9mm diameter saddle rails and is also compatible with the Tacx Mudguard - Compatible with GoPro HERO and HERO +, GoPro HERO 2, GoPro HERO 3 and 3+ and GoPro HERO 4 and 4+ models - Also suitable for any other camera with a base identical to that of GoPro cameras
This sensor measures your speed and cadence and transmits this information wirelessly via dual technology to the devices it is linked to. Because it can communicate via both channels, you can link it via Bluetooth to your smartphone and via ANT+ to your sports watch. Compatible with devices that have: - ANT+ - Bluetooth Smart* / Bluetooth 4 and higher *If you have a different Bluetooth version and you want to link the Tacx sensors to your smartphone or tablet, you can use a receiver developed specially for that purpose. For an Apple (iPhone) device, use the Wahoo ANT+ dongle. For devices with a micro USB port, use the Tacx ANT+ Dongle micro USB.
With the Tacx tablet stand you can place your tablet at a comfortable height and distance while using your bike trainer. Adjustable to different tablet sizes - length 182-267mm, width 112-197mm, max. thickness 13mm.
The Tablet Holder Assembly Kit allows fitting for various tablets to use with an at-home trainer.
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer. It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.
Wireless ANT+ cadence transmitter for SIGMA ROX 10 and all other ANT+ compatible devices.
Wireless ANT+ speed transmitter for SIGMA ROX 10 and all other ANT+ compatible devices. * Note: GPS Stem/Handlebar Mount sold separately
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
Page 1 of 6 Next page