Racks

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use

Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches

Boost the carrying capacity of your Topeak MTX BeamRack (sold separately) with their Dual-Side Frame. It enables you to attach panniers and other Topeak MTX bags to your BeamRack.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity

Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- Specifically designed for 29" mountain bikes and larger volume 700C wheels - Compatible with bike frames equipped with disc brakes - Tubular aluminum rear rack for loaded touring - MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets - 6061 T-6 hollow aluminum - 55lb weight capacity - 680g

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - Spring clip for additional cargo security - Designed for compatibility with disc brakes - 800g - 55lb weight capacity

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

For 24"-29" & 700c Wheels w/ Disc Brakes This one-size-fits-all aluminum tubular rear rack is equipped with adjustable legs to fit most 24" to 29" wheel MTB and 700C touring bikes with disc brakes. This tough tubular rack is perfect for touring, commuting, or running errands in town. The MTX QuickTrack plate is compatible with any Topeak MTX TrunkBag, MTX rear basket, and most other rack packs and panniers on the market. - Includes mounting bracket (26.5cm) - Adjustable length, Solid fender top - RedLite Mount, Tail Light Mount - Attachment: Frame rack bosses - Compatibility: MTX TrunkBags / MTX rear baskets - Material: 6061 T-6 hollow aluminum - Max Weight Capacity: 26kg / 57lb, Meets EN 14872 / ISO 11243 - Size: 41 x 34 x 25cm /1 6.1" x 13.4" x 9.8" - Weight: 820g / 1.81lb Adjustable Height - Shorten: 339mm (+-3mm) - Middle: 359mm (+-3mm) - Longer: 379mm ( +-3mm)

• Aero design rear rack for road bikes without seatstay rack mounts • Adjustable struts fit various seatstays • Installs and removes easily with center bolt clip and seatstay straps • RX QuickTrack™ system is compatible with RX TrunkBag EX • Fits road tires up to 700 x 25c

Topeak's RX BeamRack is a lightweight seatpost rack with side frames for on-road use. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 15 pounds.

We designed the Surly TV Tray to help riders boost the capacity of their current rack setups. Designed for easy pairing with nearly all Surly racks and most other racks on the market, mount this sturdy aluminum platform on top of your current rack to provide a footprint large enough for 30 lbs. of beef jerky, 9-volt batteries, used pinball parts, or whatever else you might need to haul. Available in dark black. - Load weight limit 30 lbs. - 15-3/8 x 10-inches - Rack weight 650g - 6061-TB Aluminum - Not compatible with Surly 24-Pack Rack or Wide Rear Disc Rack - Mounting Hardware Included

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

This expedition-worthy rack is made from 4130 chromoly, so it's tough, light and easily repairable in the field. It's also height-adjustable, so you can get your center of gravity as low as possible for a stable ride. The provided stainless steel hardware enables you to attach your rack to virtually any frame with 26-inch, 700c and 29-inch wheels. And, it hauls up to 80 pounds of gear and is powder-coated to protect it from the elements.

If you like to ride useful bikes, racks make a lot of sense. Surly's 24-Pack Rack ups the useable cargo space on your bike, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from cromoly tubing and uses stainless steel hardware. And it offers height adjustability, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons, too, so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore bottom, so take your stuff out of that messenger bag and put it on the front of your bike. The 24-Pack Rack is rated to carry 30lbs (13.6kg) and comes in black or silver.

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 210 x 98 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 4.5 kg WEIGHT - 249 g (incl. Straps)

Luggage Cage for triple cage mounts made of strong aluminium including high quality Nylon buckle straps. MATERIAL - 6061 Aluminium DIMENSIONS - 242 x 97 mm EXTRA INFO - 6 mounting holes for flexible attachment Nylon buckle strap max. load 3 kg WEIGHT - 281 g (incl. Straps)

• Tubular 6061-T6 aluminum construction • Three-position mid-blade mount for improved fit • Large pannier hook stops • Powdercoat finish • Maximum recommended load 33lbs (15kg) • Requires inner and outer mid-blade eyelets

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Designed specifically for lightweight touring or inner city use, with some little helpful features to help fitting to any bike, and increase options for rider safety and visibility. Closely compatible with any of our Pannier bags. This rack is light but capable of hauling a large load. - Lightweight 6061 Aluminum tube construction. - Two mounting feet for adaptability to any road, touring, or mountain bike (with rack bosses) - 2 x seat-stay mounting options (for caliper brake mount or regular rack mounts) - Compatibility with disc brake bikes (Some bikes with outboard calipers also). - Unique rear light mount option design.

A great solution for carrying more and balancing loads on the bike. Designed with a strong integrated construction, this rack can be mounted to most forks, with its versatile mounting options and three-part design. - Lightweight 6061 Aluminum tube construction. - Bow for increased rigidity. - 2x mounting options for fit to most rigid forks (must have lower fork bosses). - Compatibility with most disc brake bikes. - Fits 650b, 700c, 26", 27", and 29" wheels

The most versatile bag in the range, this large dry bag with a steep tapering body allows very easy access to a large load. The M.O.L.L.E.-inspired attachments and the rack, ensures this large bag fits securely and has zero 'sway'. Other gear and packs can be added externally and underneath the rack. The rack uses a lightweight but stable construction and is adaptable for different bike geometries. Bag Features: - M.O.L.L.E inspired anchor and strap system. - Large tapered opening. - Duraflex buckles. - Air removal valve. - Tough 600D TPU- / PU-Coated main fabric. - Gear straps included Rack Features: - CNC'd Seatpost clamp with multiple seat post size fittings. - Fabric base with M.O.L.L.E anchor points. - 6061 Aluminum construction. - Adjustable height and pitch.

- One size fit all frames sizes - Easier, user-friendly assembly - 13MM alloy frame - Maximum load rating of 15kg - Pannier bag compatible

- One size fits all frames sizes - Easy, user-friendly assembly - 12MM alloy frame - Maximum load rating of 25kg - Baby seat compatible

- Lightweight aluminum construction - Stainless steel stays - Fits most bikes with 26-inch and 700C wheels (max tire 29 x 2.1-inch) - Maximum capacity: 18 kg

- Lightweight aluminum construction - Stainless steel stays - Fits most bikes with 26" and 700C wheels (max. 29 x 2.1) - Maximum capacity: 18 kg