Filter By:

  • Show More Brands
  • Show Fewer Brands

Workstands

Topeak FlashStand
$55.00
Topeak's FlashStand is a super work/display stand that folds up to become extremely portable as well! This affordable two-footed wonder supports your bike at the bottom bracket and down tube and raises the rear wheel with two adjustable-height feet. Take it along in the trunk of your car to dial-in your ride before your next adventure!
Topeak FlashStand FAT
$32.50
Topeak's sleek FlashStand FAT is a super parking/display stand that folds up for pocket-sized portability. This affordable, lightweight wonder securely holds your mountain bike by the non-drive side crankarm to keep it upright and safe. Take it along in your jersey pocket for those quick pit stops, too!
Topeak PrepStand Elite
$333.99
The PrepStand Elite is a super workstand that folds up into its included nylon carrying case to become extremely portable, as well. Its wide base and rubber jaws hold your bike securely while you work and it also features a handy small-parts bin that keeps the parts and tools you need close at hand. Plus, the PrepStand clamp rotates 360-degrees to make repairs easier than ever.
Topeak PrepStand Magnetic Tool Tray
$49.99
Topeak's PrepStand Magnetic Tool Tray is a sturdy plastic tray with a magnetic metal bottom to keep steel tools and small parts close at hand for maximum convenience. It has a folding handle for portability and that also allows it to fit in Topeak's PrepStation (sold separately).
Topeak PrepStand Race
$283.99
Topeak's PrepStand Race securely holds bikes by cradling the bottom bracket and securing the fork with a quick release, and not by clamping the frame tubes or seatpost. This is ideal for bikes with ultra-light frames and seatposts, and for bikes with tight access areas that can't be clamped. For easy wrenching, this stand rotates horizontally 360 degrees, is adjustable up and down, and works with standard quick-release forks as well as through-axle forks. A vinyl-covered bottom-bracket cradle and velcro retention strap stabilize the bicycle so it stays put while you're wrenching. Plus, the low 10-pound weight makes it the ideal choice for traveling mechanics everywhere.
Topeak PrepStand Tool Tray w/Lid
$54.99
Topeak's PrepStand Tool Tray attaches to their PrepStand repair stand (sold separately) to keep tools and small parts close at hand and has divided compartments for maximum convenience. It's made of durable plastic and it rotates for optimum accessibility. It also has a translucent lid so nothing falls out and you can see what's inside without opening it.
Topeak PrepStation
$916.99
All you ever needed to work on your bike—and more — is available with Topeak's comprehensive PrepStation. In addition to over 40 pro-quality tools, you also get an easy-moving wheeled trolley with one covered parts tray, four swiveling tool trays and a 9.4-inch-tall storage compartment to carry parts for every job. With an extendable handle that locks, it's simple to maneuver the PrepStation from the garage, to the car, at the trailhead, or anywhere. It's perfect for bike shops, race-day maintenance, or simply as your home tool station.
Topeak PrepStation Case Cover
$89.99
For extra protection of your favorite tools, Topeak's PrepStation Case Cover is made of 1000-denier nylon and EPE foam and slides perfectly over the PrepStation (sold separately). Even with it on, you can still unlock and extend the handle to move the case around quickly and easily.
Topeak PrepStation Tool Tray
$44.99
Topeak's PrepStation Tool Tray attaches to their PrepStand repair stand (sold separately) to keep tools and small parts close at hand for maximum convenience. It's made of light and durable plastic with a padded bottom to hold tools in place, and it rotates for optimum accessibility.
Topeak RideUp Stand
$145.00
Topeak's RideUp Stand supports your bike by the rear wheel so you can check and fine-tune brake and derailleur adjustments, and everything else. It's even strong enough to support a rider, great for double-checking fit adjustments and it's also ideal for storage, display and maintenance. Plus, this compact folding stand features an easy-to-use clamp that makes installation and removal a snap.
Topeak Weight Scale
$99.99
Weight freaks rejoice! Topeak's Weight Scale is the perfect addition to your PrepStand Pro or PrepStand Elite. It quickly and accurately measures anything from small parts all the way up to bikes and wheels.
Tacx Spider Prof
$399.99
With the Spider Prof repair stand you can easily perform the toughest repairs or lighter work such as adjusting and cleaning. - Anodized aluminum tubes are lightweight and resistant to detergents - Triangular profile means dirt is less likely to adhere to the surface - The integrated tool surface is height adjustable and can rotate 360-degrees - Compact when folded and easy to carry - Weight: 14 lbs - Maximum load: 44 lbs
Tacx Spider Team
$349.99
The Spider Team repair stand is developed in collaboration with pro team mechanics who work with it intensively on a daily basis. Thanks to their tips, you too can adjust, assemble, and repair in an efficient manner. The Spider Team is also suitable for different shaped bottom brackets, such as time-trial bikes, bicycles with sensors for power measurement and bicycles with electronic gearing (Shimano Di2 or Campagnolo EPS). - Extra parts included for a variety of forks - Due to its triangular profiles dirt is less likely to adhere to the surface - Anodized tubes are lightweight and resistant to detergents - Compact and easy to carry when folded - The integrated tool tray can tilt and rotate 360-degrees - Weight: 9 lbs - Maximum load: 33 lbs - Not compatible with Lefty forks
Super B Base Pad
$9.99
Spare part for all Super B tripod work stands.
Super B Professional Work Stand
$349.99
Features: - Velcro fastener secures frame to bottom bracket cradle. - Plastic bottom bracket cradle won’t harm bike’s finish. - Carry bag, tool tray and wheel hook are included. - Very easy to open, stable tripod base folds for storage. - Ideal for heavy-duty work.
Super B Shop Repair Stand
$279.99
- Perfect for home mechanic use. Unique tripod base is designed to perform on rough terrain or smooth concrete; It’s your first choice when you start to do repairs at home. - Adjustable linkage clamp rotates 360 degrees, allowing bikes to be positioned at any angle, making your job easier - Weighs: 5.4kg - Clamping height adjusts from 111-154cm - Tool tray is included - Very easy to open, stable tripod base folds for storage
Super B Sliding Thru-Axle Adaptor
$24.99
- Thru-axle adaptor for TB-WS10 Professional Race Workstand - Works with 15mm and 20mm front forks
Super B Tool Tray
$24.99
TB-WS11 has deep wall compartments and various slots. Perfect for holding any tools and lubricants. Fits TB-WS10 workstand.
Super B Work Stand Replacement Rubber Clamps
$9.99
- Made of environmentally friendly plastic, TPR. - Spare part for Super B work stands: TB-WS20, TB-WS460, TB-WS30.
Park Tool 100-15X Extreme Clamp
$319.99
- PRS-15 work-stand mount-interface - Clamps oversized, square, rectangular, and aero-shaped tubing - Narrow jaws for tight access with infinite-adjust clamping pressure - Extreme-Range (100-15X) slide-lock, investment-cast aluminum clamp/head mechanism fits 7/8"-4" tube sizes - Fits: PRS-15 repair stands
Park Tool Accessory Collar for 106 Work Tray
$22.99
Park Tool's 106-AC easily adapts the #106 Work Tray or PTH-1 Paper Towel Holder to fit 35mm-37mm upright tubes on PCS-9 Repair Stands, as well as 2003 and newer PCS-1, PCS-4, PCS-4-1, PCS-4-2 Repair Stands.
Park Tool Adjustable Linkage Clamp
$254.99
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-3C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits all generations of PRS-2, PRS-3, and PRS-4 stands, and PRS-5 stands manufactured before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers
Park Tool Adjustable Linkage Clamp
$239.99
Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-5C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing, and feature replaceable jaw covers. - Fits PCS-4, PRS-5, PRS-6, and PRS-7 stands made after 6/96 - Fits bike frame tubes from 1" to 1 5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers
Park Tool Base Plate for PRS-33
$465.99
115 pound (52kg) base plate with floor levelers for the PRS-33 Power Lift Shop Stand
Park Tool Bench Mount Home Mechanic Repair Stand
$181.99
Park's Bench Mount Home Mechanic Repair Stand features a quick adjusting cam-type clamp that fits on frame tubes up to 76mm in diameter. Plus, the clamp rotates 360 degrees for access to any part of the bike for easy repairs. The clamping pressure is fully adjustable, too, to prevent damage to lightweight frame tubes. Plus, this excellent stand boasts a durable powdercoat finish, protective rubber jaws, and it mounts to any flat surface (bolts sold separately), so you can turn just about any nook and cranny in your house or garage into a proper bike repair facility!
Park Tool Bench-Mount Repair Stand
$331.99
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.
Park Tool Bench-Mount Repair Stand
$279.99
Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas like on seatposts that aren't raised much. This stand rotates 360 degrees for optimum bike positioning, too.
Park Tool Cast Aluminum Tool Tray
$107.99
Park's Cast Aluminum Tool Tray attaches easily to most of Park's repair stands (sold separately) to keep your tools, lubes and small parts close at hand. It has deep sides so your small items stay put, a holder for cans of lube and slots for holding your tools. This handy tool fits Park's PRS-2, PRS-3, PRS-6, PRS-13, PCS-1, PCS-1 and PCS-4 repair stands manufactured after June 1996 (stands sold separately).
Park Tool Deluxe Bench Mount Repair Stand w/100-3C Clamp
$432.99
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Park Tool Deluxe Bench Mount Repair Stand w/100-3D Clamp
$442.99
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Page 1 of 3 Next page