Filter By:
- Lubes/Cleaners (158)
- Tools (893)
- Workstands (61)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$79.99 - $84.00
The Dynaplug Racer Pro improves upon the legendary Racer's original design with Twin Tube technology.
This allows you to store x4 pre-loaded plugs ready to go in a single tool. Snap-on caps protect plugs from dirt and damage. When your ready to make a repair, just pop off a cap to deploy either a standard size plug (with wheel-friendly soft brass tip) or the aluminum Megaplug for mega-big punctures. If you need more plugs just unthread the Twin Tube and flip it around for more plugging action!
Machined in Chico, CA from US-made billet aluminum and stainless steel, the Racer Pro weighs 26g, only 2g more than the prior generation, yet delivers twice the puncture-defeating power!
What's in the box:
x1—Dynaplug Racer Pro Tool
x1—Megaplug plug
x3—Standard Plugs
x1—Standard Twin Tube
x1—Standard/Megaplug Twin Tube
$84.99
The Dynaplug Pill (aka Micro Pro) is an ergonomic, compact repair tool that quickly fixes most punctures in tubeless bike tires.
- Perfect for race situations, as the wheel stays on the bike
- Repair plugs are compatible with UST and tubeless ready tires (both ATB and Road)
- Less mess! (fix tire without dumping sealant)
- Made in USA from machined solid billet AL6061
- 42g
Kit includes:
x1—Pill tool (dimensions: 2.25" x 0.875")
x5—Brass soft nose tip repair plugs
x2—Insertion tubes
x1—Micro knife
x1—Air stopper
x1—Pipe cleaner
$6.99
- Installs and seats against the inner race of the cartridge bearing for removal (punch from other side of tool against tool flats)
- Effectively fits on cartridge bearings with 10-25mm inner race ID's
$49.99
- Installation wrench for all Enduro TorqTite Bottom Brackets
- Some TorqTite installations require two wrenches
$129.99
- This tool allows you to swap out the chain rings on Cannondale cranks by removing the spider.
$289.99
- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets.
- The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore.
- The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.
$319.99
- Removes bearings from hubs and various other items
- Works on bearings with an internal diameter of 8-32mm
$329.99
- Tool for pulling and pressing bottom bracket bearings.
- For all BB30 frames and bearings
- Allows the bearing to be pulled without damage for cleaning and re-greasing
- Also safely presses bearings back into cups
- Instructions included
$374.99
- Hub bearing press set with 10 guides
- For ID 8-20mm
$9.99
- For adjustment of spoke tension
- Compatible with 9 - 15 gauge spoke nipples
$14.99
- For removal (and installation) of chain link pins
- Compatible with 7, 8, 9 and 10-speed chains
$14.99
- For use with majority of Hex bolts found on a bicycle
- 4, 5, 6mm Hex
$19.99
- For removal of crank arms from cartridge style bottom brackets
- Compatible with square taper, Octalink and ISIS bottom brackets
- Works with 8mm Hex or large adjustable wrench
$19.99
- For removal (and installation) of chain link pins
- Compatible with 7, 8, 9, 10 and 11-speed chains
- Comfortable rubber coated handle improves grip
$19.99
- 7-pc wrench set includes 1.5, 2, 2.5, 3, 4, 5, 6mm hex wrenches
- Long handles for improved grip and reach
- Ball-ends allow up to a 25-degree entry angle so you can easily reach around obstructions
- Color coated for quick reference
$19.99
- 3" multitool is compact for easy carry while the 2" tool length provides the leverage you need
- Ergonomic rubber coated non-slip side plates for increased grip
- 2, 2.5, 3, 4, 5, 6 and 8mm hex, T25, Phillips, Flat
$23.99
- For installation or removal of pedals
- Compatible with most pedal axles
- Comfortable rubber coated handle improves grip
- 15mm wrench size
$24.99
- For removal of cassette-type rear wheel gears
- Must be used with compatible cassette lockring tool
- Comfortable rubber coated handle improves grip
- Fits up to 9sp cassette
$25.99
- All the brushes you need to detail your bike like a pro
- Large, ergonomic handles feature an EasyGrip inlay
- Tapered brush with soft bristles gets in all the tight, hard-to-reach spots
- DuoBrush combines sponges and soft bristles—great for frames and tires
- Gear cleaning brush with 3 brush heads makes quick work of drivetrain cleaning
$29.99
- For clean cutting of bicycle cables and housings
- Spring loaded for ease of use
- Built-in pick for opening housing liner
$29.99
- Lightweight and convenient tubeless plug kit
- Includes two tools—a tire reamer and a tire fork perfect for mountain bike tires.
- Integrated alloy case includes 10 plugs
$34.99
- For removal of cassette-type rear wheel gears
- Must be used with Chain Whip tool when removing lockring
- Compatible with Shimano/SRAM cassettes
- Comfortable rubber coated handle improves grip
$34.99
- For careful installation of stem, seatpost and cockpit components
- 5Nm fixed torque setting
- 3, 4, 5, 6mm Hex, T20, T25 Torx
$249.99
- Clamp height adjusts from 41.75"- 56.75" (106 to 144 cm) to allow you to work at a comfortable level
- Clamp head rotates 360°
- The articulating jaw on the clamp provides a large clamp opening, allowing the bike to be easily inserted and removed by flipping the cam lever.
- Clamp head is micro-adjustable to accommodate various tube sizes.
- No tools required for quick setup and storage
- Lightweight aluminum construction
- Product Weight: 13.6 lbs (6.18 kg)
- Max load capacity: 77 lbs (35 kg)
$11.00
- Gel contains non-Abrasive plastic beads that provide increased surface friction
- Allows for reduced clamping force, prevents crushing of expensive carbon parts (Brake lever/Bar, Bar/Stem, Stem/Steerer, Seatpost/Frame, Etc)
- Prevents corrosion/scuffing and quiets creaking noises
- Can also be used on non-carbon parts where an increase in clamping friction and/or a reduction in clamping force is desired
- Always follow the manufacturer's torque specifications when clamping carbon parts
$99.99
- Installs and removes threaded cups for 386Evo cranks
- Socket type tool for 1/2" drive socket wrenches
$224.99
Being a "shade tree mechanic" doesn't mean you should lean your bike against a tree. You paid hard-earned money for your family's bike collection and we've got a budget-conscious, yet feature-loaded bike repair stand that's perfect for the home bike mechanic. The price-point leading 360-degree rotating clamp can position your bike optimally for any work you're planning. Plus, the Recreational Stand leverages a 52-inch (132cm) wide base with rubber-coated end caps for fantastic stability on any surface. And when the service day is done, it folds into a space-saving unit for storage. Add a Tool Tray, Bottle Opener, and a Pro Truing Stand for the complete at-home bike shop.
- Seatpost clamp features Spinner Knob for quick closure and precision clamping pressure
- 360-degree rotating clamp design provides easy access to any part of your bicycle
- Fixed clamp height at 55-inch (139cm)
- Rubber-coated clamp secures and protects expensive components and beautifully painted frames
- Clamp opening up to 1.9-inch (4.8cm) accommodates even the largest diameter frame tubes
- Powder-coated steel construction is corrosion-resistant and incredibly durable
- Stiff 52-inch (132cm) base and rubber-coated end caps create ultimate stability even on uneven surfaces
- Total load capacity of 60lbs (27.2kg) accommodates service on most road, mountain bikes, fitness bikes, and electric bikes
- Portable and compact construction creates a remarkably small folded footprint of 10 x 4 x 55-inches (25.4 x 10.2 x 139.7cm)
- Optional Travel Bag available
- At 13.8lbs (6.3kg), moving in and out of storage is no problem
- No assembly required
- 3-year Warranty
$9.99 - $99.99
For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line!
- With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants
- No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant
- Helps avoid abrasive wear allowing parts to run more smoothly and last longer
- As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.
$9.99 - $54.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes.
- Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives
- Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection
- Upon application, wipe excess off chain to minimize attraction of dirt and grime
- Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.