Outils

- Quickly and accurately determine the wear and stretch of any chain

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

- Pedal thread inserts are used to replace damaged threads in cranks

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

- Ratchet operates in clockwise and anti-clockwise directions - For tightening on right hand threaded bolts and nuts - Signal when set torque is reached - Default value for the recalibration interval is 12 months of use, or approximately 5000 cycles - Dual scaled, Nm and Kgm

- Crank Saver—Pedal thread repair and insert kit - Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

Redesigned! We've made the base stronger for better stability. One-size-fits-all conical thru-axle adapters are now included with the stand, and are held in place by magnets when not in use. The arms have been made longer to accommodate 29+ wheels better and the calipers widened accordingly. Threads, springs and bearings were all revised resulting in smoother operation plus less frequent calibration. Additionally, we include white high-gloss stickers you can apply to the base and caliper arm to improve background contrast, making it easier than ever to use. -Stronger base for improved precision -Longer and redesigned upright arms for improved clearance of 29+ wheels -Wider calipers for increased clearance of 29+ wheels -Accommodates wider axles, works with through axle hubs up to 197mm width (include the use of adapters). Max. arm opening 230mm (without the use of adapters). -New bearings on the upright arm adjust axle are spring loaded for improved precision and reduced frequency of calibration -Redesigned caliper tips for easier radial truing -Revised threads and springs for smoother operation -8mm bench mount holes at the bottom, 268 mm center to center -Slicker design, all black. Includes white high gloss stickers, covering the base and caliper arm, for improved background contrast (stickers are not preapplied) -Comes with conical magnetic through axle adapters – one size fits all (12, 15 and 20). The adapters are now magnetic and can be affixed anywhere on the base. Features a bolt for more permanent fix on the upright arms. Compatibility: -Accepts wheels from 16 to 29+ inch with or without tire. Supports solid, quick release and through axle hubs -Accepts hubs up to 197mm when using our thru axle adapters, 230mm without. -Through axle hubs are supported with use of the adapters (included) -One pair of through axle adapters support all sizes of through axles

- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg

- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg - The stand features a new array of precision aluminum and steel parts which offer stiffness and durability - NEW Jaw mount and rotation system - Stand is adjustable by height between 980 and 1500mm

- Electric repair stand is not just powerful, but also smart. It features endless height adjust, but it can also lift or descend a bike automatically with a push of a button. It also stops on its own when bike reaches the ground. - Endless height adjust, travel adjust limiters, internal routed cables - Equipped with Master shop repair clamp 1693.1M - Secures directly to the floor or on a heavy-duty metal fixed plate - Measurement: W750xL750xH2072 mm - Weight: 106 kg (with a steel fixed plate) - Load capacity: 400N (40kg)

- Fits Truvativ ISIS bottom brackets with 8-notch flanged cups (also fits crank spider nut on older X-Flow and Stylo crankarms) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces

Tools and kits to remove 30mm bearings

- Fits Truvativ GXP and Howitzer external-bearing bottom brackets with 16-spline/notched cups (also fits Shimano HollowTech-II bottom brackets) - CNC machined, heat treated steel construction - 1/2" ratchet drive and 32mm wrench flat tool interfaces

Tools and kits to install 30mm bearings

Topeak's Shuttle Levers will remove even the most stubborn downhill tires. These levers are extra long for leverage and are made of engineering-grade plastic that is strong, rigid and durable.

Topeak's Shuttle Levers are strong enough for even the busiest shops; think what they'll do for that tight road tire and fat downhill rubber. These levers are extra long for leverage and are made of engineering-grade plastic with stainless-steel reinforcements down the middle that ensures years of hard use.

Topeak's CageMount is an easy way to attach an additional water bottle cage to your handlebar or seat post. Provides convenient access to an extra water bottle during extended commutes or when cycling in warmer weather.

An ingenious lightweight multi-function tool! Two levers connect to form power link pliers for removing or installing a chain's master link. Power Lever easily separates into two pieces for use as two tire levers. Integrated chain hook holds chain steady while removing or installing master link. - 4 Tools: PowerLink pliers, tire levers and stainless steel wire chain hook - Tool Material: Engineering grade polymer - Chain link storage compartment - Size: 11.5 x 2.3 x 1.8cm / 4.5" x 0.9" x 0.7" - Weight: 45g / 1.59oz *Not compatible with Shimano QUICK-LINK (SM-CN900-11)

Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.

Topeak's Handlebar Stabilizer secures your front wheel and bar when your bike is in the stand, making it easier than ever to work on your ride.

This lightweight, compact tool includes Torx sizes (T10/T15/T20/T25) to work on modern bike components while other popular tools, (1.5mm/2mm/3mm/4mm/5mm/Phillips), help with your repair or maintenance needs. - Functions: 10 - Allen Wrenches 1.5 / 2 / 3 / 4 / 5 mm - Torx Wrenches T10 / T15 / T20 / T25 - Screw Drivers #2 Phillips

The PrepStand Pro Upgrade Kit makes measurement simple. It features a tray for weighing small parts and a hook for weighing larger items. This is a great upgrade for your Topeak PrepStand Pro.

Topeak's sleek FlashStand FAT is a super parking/display stand that folds up for pocket-sized portability. This affordable, lightweight wonder securely holds your mountain bike by the non-drive side crankarm to keep it upright and safe. Take it along in your jersey pocket for those quick pit stops, too!

At only 62 grams (2.2oz), this super-light Ninja pump hides inside your seatpost to keep the clean lines of your bike, while still easily accessed when needed. Its rubber mounting ring secures the pump and the included position indicators keep track of your seat height. Compatible with round seatposts only.

TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g

Topeak's Mini 9 Pro folding tool is superlight and contains all the basics for road or trailside repairs. Its forged-aluminum body holds 9 tools including: 2, 2.5, 3, 4, 5, and 6mm Allen wrenches and a Phillips screwdriver. Two tire levers integrated into the tool's body help you repair that flat quickly and get back on the bike. Plus, this smart tool tucks neatly into its included neoprene case.