Bouteilles

Tailormade for gravel and adventure cyclists. Designed for long mixed terrain rides and races where extra water capacity and quick access to food and supplies is essential. With an included fast-flow bladder (2.0 L), and selection of pockets on both the front and rear, the pack adds significant capacity and versatility to race setups without limiting access to jersey pockets. - Lightweight, breathable 3D mesh construction - 70D lightweight ripstop with TPU waterproof coating - Stretch mesh pockets - Lycra side panels provide stretch and comfort - Quick release buckles incorporating magnetic hydration hose clip - Available in two sizes to enable the perfect fit for all body shapes - L/XL is designed for riders with a 80-125cm chest measurement - Total pack capacity: 7.0 L - 414g

Designed to give you the Low Rider advantage, the M.U.L.E. LR combines the storage and features of your favorite M.U.L.E. pack with a lumbar reservoir based design that offers more stability during aggressive downhill rides or backcountry terrain. Instead of concentrating pack weight on your shoulders, this pack shifts the load to your hips for a lower center of gravity and more freedom of movement. The M.U.L.E. LR is built around our top-of-the-line 3-liter Crux lumbar reservoir that delivers more water per sip. And, the separate reservoir compartment is optimized for fast and fumble-free refills, no matter how full the rest of your pack is. The flip down reservoir garage also gives access to the tool roll and rain cover, so repair and weather essentials are always within quick reach. Easy-access storage on the harness gives immediate access to essentials without removing the pack. - All the features of your favorite M.U.L.E. pack with a lumbar design that shifts your load for increased stability - 3-Liter CRUX LR Reservoir with Integrated Compression: Keeps your fluids low and tight for better balance and increased pack stability - Magnetic Tube Trap: Keeps your tube secure and accessible when you need it - Helmet Carry: Universal hooks to stow your helmet when not riding - Cargo Compression: Keep your gear close to your body for better balance and increased stability - Soft-Lined Pocket: Keep sunglasses or electronics safe and easy to access - Adjustable Sternum Strap: Custom fit for a wide variety of chest sizes - Reflectivity and Light Loop: For added visibility and safety - Gear Capacity: 12L/730 cu in

Long haul storage solution for hydration and riding essentials. - 3L HydraPak® reservoir - Fleece lined pocket for electronics - 18L storage capacity - Structured back pad to help retain shape - Quick access pass-through zippered stash pocket - Stretch mesh side pockets - Side compression straps to stabilize load - Tool dividers - Reflective trim - Key clip - Molle webbing for accessory attachment options - 600D Polyester

Go-to storage solution for hydration and riding essentials. - 2L HydraPak® reservoir - Fleece lined pocket for valuables - 10L storage capacity - Magnetic hose retention - Key clip - Molle webbing for accessory attachment options - 600D Polyester

For optimal aerodynamic advantage. - Designed to fit seamlessly with the 3rd Generation Trek Speed Concept SLR - Kit includes complete bottle, cage, and mounting hardware

Hip pack storage solution for hydration and riding essentials. - Low profile 1.5L HydraPak® reservoir - 2L Main pocket with divider to keep your essential items organized - Dual collapsable water bottle holsters for additional hydration options - Easy access tool storage with dividers - Wicking fabric next to skin keeps you cool and dry - Reflective details provide improved visibility - 600D Polyester Ripstop-PU Face

Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!

- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams

Quickly and efficiently take care of your aero hydration and computer holding needs with the Bontrager Speed Concept carbon Computer Cage. It allows bottle access while maintaining aero position and also incorporates an integrated bike computer mount. • Carbon fiber cage construction • Designed to be mounted to the Speed Concept Mono Extensions • Adjustable track mount system can mount to standard water bottle spacing and adjusted for perfect placement • Securely holds standard water bottles • Integrated computer mount will accept standard bar-mounted computer mounts • Adapter for SRM computer mounts included

The fast and functional RSL Aero Water Bottle and Cage makes your bike faster and keeps you hydrated. MAKE YOUR BIKE FASTER The Trek RSL Aero Water Bottle and Cage is designed for the Madone Gen 8 and proven to make your race bike — even from other top brands — faster. The system is UCI compliant and the cage also holds round bottles making it the ultimate hydration system for your bike. PRODUCT DETAILS - Tested 1.8 watts faster at 22 mph on the Madone Gen 8 compared to standard round bottles - Tested faster on other race bikes in our aerodynamic modeling system - RSL Aero Bottle Cage securely holds the RSL Aero Water Bottle and standard round water bottles - UCI compliant to ensure safety at all levels of competition - RSL Aero Water bottle is USDA approved and free of BPAs and phthalates - Bottle and cap are dishwasher safe and recyclable - RSL Aero Bottle Cage is constructed from strong and lightweight OCLV Carbon - Includes mounting hardware to install the RSL Aero Bottle Cage

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

Minimal Solution To Carry Everything You Need On The Ride If there's one thing that's true, there are never enough pockets. Fortunately, where you're going you won't need pockets, not with the Hip Pack. This storage solution can be worn either over or under your jersey, and features a 2-liter divided pocket for all your ride essentials. If hydration is your thing, the dual water bottle holsters will turn you into an H2O bottle slinger, giving you up to 50oz of capacity. Don't worry about getting too hot either—the wicking fabric keeps you cool and dry. - Wearable over or under jersey - Main pocket with divider - Dual water bottle holsters with over 50 oz of combined capacity - Easy-access tool storage with dividers - Wicking fabric next to skin keeps you cool and dry - Reflective details provide improved visibility DIMENSIONS - Gear Capacity: 2 L

The most effective way to carry water in a Full Frame Pack. This is the first frame pack specific bikepacking hydration bladder, optimised for efficient use of space. Now your customers don't need to compromise between carrying water and other essentials. Key features: -In-pack refilling -Secure roll top closure -Quick click hose connection -Large bite valve -Clear fill markings -PVC free -Detachable 1.2m long hose -120g Fits all FULL Frame Packs from the Expedition and Backcountry series. Also fits Expedition Compact Frame Packs (4.5L and 5.3L), and the Expedition Tall Frame Pack 6.5L

Be ready to ride at a moment's notice with plenty of space for MTB essentials on rides lasting two hours or less. Always be prepared For off-road riders who give up seat packs for dropper posts, Rapid Pack is perfect for mountain bike rides lasting two hours or less. Designed with a sleek aesthetic that makes you feel like you aren't wearing your uncle's fanny pack, this bag holds all your essentials when cargo pockets are being used and hydration packs are overkill. Product details - Lightweight stretch woven material is durable and works with the body's natural movements - Ridged foam back panel for breathability and comfort - Two zippered security pockets hold essentials - Left-side opening features internal mesh pockets for easy gear organization - Middle waterbottle pocket centralizes weight while riding - Right-side opening features internal mesh pockets with compression phone sleeve and key fob - Fits most tubes including fat bike and plus sized models

Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.

- Durable fiber-reinforced Composite Matrix construction - Optimized side-load design for easy access in compact frames - Available in right-side configuration only - Integrated storage container - CO2 cartridge holder on both sides of the cage - Integrated storage container includes CO2 head, V Pro 17 multi-tool with tubeless reamer, and tire plug kits - Includes two 20g CO2 cartridges

Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. Includes lightweight alloy mounting screws Product details - Full carbon construction - Secure bottle retention suitable for road and mountain use - Available in a variety of colors

Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g

The antibacterial upgrade for the popular 590 TWIST bottle. Tried and tested in the medical and food industries, the technology prevents the formation of unpleasant odours caused by bacterial growth inside the bottle. The purely physical effect inhibits bacterial growth and does not release bioactive substances such as silver ions. 590 ml bottle with antibacterial FIDGUARD technology incl. magnetic-mechanical bottle mounting system for bike frames Even after cleaning a water bottle, a certain residual moisture remains on the inner walls. This can lead to the growth of bacteria, which can emit a musty odor over time. The new TWIST bottle 590 antibacterial puts an end to this. Thanks to the innovative FIDGUARD technology, the growth of bacteria in the residual moisture on the inside of the bottle is prevented. Foul odors are a thing of the past. This medically proven process works purely physically and does not rely on the addition of chemical substances. This not only keeps the bottle fresh and clean, but also eliminates any concerns about possible residues. - 590 ml / 19.95 fl oz - Antibacterial FIDGUARD Technology - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits

More TWIST in your everyday life: The Fidlock Twist bottle 700 Life is the first Tritan bottle for bicycles and offers a taste-free drinking experience. With a capacity of 700ml, it is ideal for city trips, the countryside or the daily commute. The bottle is available in four colors to suit any lifestyle. The screw top with large drinking opening makes it easy to fill and clean. The clean design and high-quality finish make the bottle not only a practical accessory for cyclists, but also a stylish everyday companion. The bottle is compatible with all TWIST bases. The magnetic-mechanical attachment and belt-only technology ensure a secure hold on the bike frame at all times. - 700 ml / 23.66 oz - Durable Tritan Material - Wide Mouth Design - Always BPA-Free & BPS-Free - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Attaching to bottle cage and accessory mounts, the Innovation Lab Cargo Cage provides a secure mounting point for attaching bags and accessories to your bike. Compatible with two and three bolt mounts, the Cargo Cage features an optional extending foot for increased capacity. - Designed to complement the Expedition Cargo and Expedition Fork packs - Slim design for downtube clearance - Universal strap attachment system - Precision-crafted from 6061 aluminium alloy - Corrosion-resistant ano finish and stainless bolts - 85g

Elevate your adventure with the TWIST 590 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 590 ml / 19.95 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

Elevate your adventure with the TWIST 800 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! As our largest bottle, the 800 is perfect for larger frames or extra long rides. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 800 ml / 27.05 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

The BPA- and PVC-free Hydration Bladder 2 Insulated with insulated hose and a 20% increase in water flow lets you lap it up on even the coldest day in the snow. - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Can be filled with hot or cold water (up to 60°C) - Volume: 2L - Weight: 140g - Measures: 17 x 32 x 1cm

The durable Hydration Bladder 3 for backpacks contains no BPA or PVC. The easily-detachable hose and valve increase water flow by 20%. - Can be filled with hot or cold water (up to 60°C) - Leak-proof and easy to fill with Slide Seal - Easy to clean all parts - Volume: 3L - Weight: 140g - Measures: 18 x 42 x 1cm

Elevate your adventure with the TWIST 450 Bottle + Bike Base. This sleek design uses strong magnetic force and mechanical latching to cagelessly secure bottle to bike. Our patented technology magnetically snaps your bottle in place and only releases when you give it a TWIST. Never lose a bottle on the trail again! As our smallest bottle, the 450 is perfect for small frames or for those who like to ride light. Always BPA-Free & BPS-Free. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your bike base. - 450 ml / 15.22 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bases - Dishwasher-safe without Connector - Proposition 65 Approved