Composantes

Shimano delivers their trademark smoothness and ergonomics with the 11-speed Ultegra shift levers. Pro Tour-proven tech, like the shifter internals and polymer-coated shift cable, offers shifting at the speed of thought with jaw-dropping light action and defined tactile feedback for the rider. Hand-pleasing ergonomics offer near perfect hood and lever placement so these controls are comfortable all day long, whether you're cruising on the tops or deep in the drops. Special attention was paid to the shape of the brake lever, offering you incredible ergonomics from the drops and more power from the hoods. On top of all that, stealthy, under-the-tape cable routing cleans up the front of your bike, with a clean, minimalist, and pro look.

Shimano's Tiagra Dual Control Lever (2x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. -Model Number: ST-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Front Shifting: 2 - Shift Cable: Lever side:OT-SP41 / RD side: OT-SP41 Sealed - Reach Adjuster: Screw

The Shimano 105 R7000 mechanical brake Dual Control Levers bring quick and intuitive shifting and confidant braking in an affordable package. Features - Redesigned internal shifting unit - Greater reach adjust range - Easier access to inner shift cable - Quick and intuitive rear shifting operation - Reliable performance in race conditions - Lighter front shifting when paired with FD-R7000

- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility

Shimano's Di2 Bar-End Shifters are the ticket for time trial/triathlon bicycles running Shimano's Di2 electric-shifting components (sold separately). With a simple, light touch of the easily accessed buttons, you get instant, perfect gear changes every time.

The Volt is WTB's most popular mountain saddle. Its medium level of padding thickness complements subtle curves and a melange of popular features. A slight whale tail and gentle drop to the nose provide something to push against while also not limiting riders to one seating position. This saddle has enough padding for all day riding comfort, yet scant enough weight for XC competition, gaining it endless acclaim and popularity among riders. Usage: Cross Country Racing / Road / All Mountain / Enduro Length: 265mm

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Freehub bodies for Zipp Cognition hubs.

Steel sprockets with nickel-chromed finish. Built with one triplet and 8 single sprockets. - Includes lockring - 11-32t compatible only with medium-cage rear derailleur - Cassette Body Type: Campagnolo 10/11 Speed - Weight: 249g

KMC X12 chains feature a double X bridge shape for fast and smooth shifting. - Compatible with SRAM 12-speed systems - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - 1/2 x 11/128 - 126 Links

SRAM's GX 2x11 Crankset W/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x11-speed shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. • 11-Speed • 6000 series AL • Bottom Bracket compatibility: GXP or BB30 (not included) • X-GLIDE 2x10 shifting technology • Chainrings: 36/24-tooth • Crank lengths: 175mm, 170mm • Color: Black • All Mountain Guard included, but not shown

TRP’s HY/RD gives you the performance and feel of hydraulic disc brakes with one simple—but significant—change to your existing mechanical disc-equipped road or ‘cross bike. The HY/RD (High Road) uses your current cable to activate the hydraulic caliper for more power and modulation than a conventional mechanical disc brake. The dual-piston caliper engages both brake pads when you squeeze the lever, so a crisp, responsive lever-feel accompanies your excellent stopping power. Available with 140mm or 160mm rotor options, these brakes deliver the perfect amount of control for your needs, whether it’s long, hilly descents or frequent, lower-speed dismounts in cyclocross. Plus, their slim profile tucks in neatly for great aerodynamics and minimal obstruction on chaotic ‘cross remounts, so the HY/RDs will only slow you down when you want them to.

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8-10, MTB 11-speed - 6-bolt disc mount - Sealed bearings (DC711 & DHT148) - TA Axles not incl. - Quick Release binder included (DC2241) - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Shimano's Claris Dual Control Levers offer smooth shifting and confident braking. The hoods are ergonomically contoured for a comfortable grip and easy access to shifting controls from any handlebar position. Top-view gear indicators ensure you know which gear you're in at all times.

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim and full 8/9/10/11sp road cassette compatibility. - Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish - Joytech alloy QR hubs w/serviceable cup and cone bearings - 11sp Shimano road steel freehub body w/included 1.85mm freehub spacer for full 8/9/10/11sp compatibility - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver) - 32H/3X lacing - Presta drilling - QR levers & high-pressure rim tape included - Not tubeless compatible - Weight: 1235g

Comfort without sacrificing power Aeolus Elite brings comfort, power, and speed to road riders looking to dig deep and rotate further forward into a more aero road position. It's the go-to race saddle for both men and women who want to comfortably get the most out of their aero road bike. A shorter overall length with a wider nose and full cut-out ensure targeted support that eliminates soft-tissue pressure. Product details - inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort - Designed to support riders in an Aero Road riding position - Full saddle cut-out minimizes soft-tissue pressure allowing for a more powerful, rotated position - Two sizes designed to align saddle with bone structure for both men and women and avoid soft-tissue compression - Austenite rails are lighter and stronger than hollow Titanium - Lightweight shell provides balance of weight, strength, and compliance - Elite-level trim optimizes foam padding for added lightweight comfort - Available Blendr accessory mounts to cleanly integrate rear light

Leave it up to Brooks to improve on a classic. The B17 Imperial features a design that dates back to 1890, with a pressure reducing cutout that ensures your comfort in the miles to come. And, of course, the B17 Imperial features Brooks' full-grain, premium leather, and trademark rivets for the ultimate in comfort, style, and durability.

Globally renowned and truly timeless, the B17 S Standard is the saddle that secured Brooks' place in cycling history. It's been in constant production since 1910, providing cyclists around the world with over one hundred years of sublime support and unrivaled comfort. Each B17 S Standard shapes itself to its rider, leading to a personal, customized saddle that fits like no other. The S models are shorter and wider than a normal B17 and are uniquely suited to women riders. And of course, it features Brooks' full grain, premium leather top secured by their trademark rivets for the ultimate in style and durability.

- Lighter, grippier, faster - The ''Turbo'' of spike tires - Agile and sporty - Please note, in order to ensure that spikes are permanently fixed, tires should be run in for about 40km (25 miles) on asphalt, while avoiding any fast acceleration or heavy braking.

- THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

BL-M4100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-MT420 - 90% braking power vs. BR-MT520 - 20% increase braking power vs. current 2-piston BR-MT400 - 150% better wear-resistance vs. current 2-piston BR-MT400 - Brake pad: resin, metal - Pre-assembled and bled brake lever and caliper, with SM-BH59-SS hose & mineral oil - Without rotor and adapter - One-way bleeding system

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

SRAM's GX-1000 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Compatible with X-Sync chains - 6000 series AL - CNC machined 7075, two-tone anodized X-Sync chainring - Bottom bracket configurations: BB30, GXP, and Fat Bike GXP - Compatibility: Boost 148 hub or standard hub - Bottom bracket sold separately

SRAM's 11-speed X01 Trigger Shifter fires off shifts quickly, precisely, and most importantly, dependably. It uses SRAM's X-Actuation for sharp, consistent shifts over any terrain, in any condition. An aluminum body and lever keeps the weight down, and the adjustable clamp mount and trigger position lets you dial in the ergonomics. Plus, its compact size plays well with almost all brake levers and is MatchMaker X compatible.

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7100 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7100 2-piston caliper provides lightweight braking performance and is combined with quicker piston retraction. - 10% stiffer than previous generation M7000 even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup

Elegant and secure direct-mount X-SYNC chainrings from the company that originated the 1x drivetrain for the ultimate in consistent chain control over the long haul. - DUB bottom bracket adds durability and simplicity - Wide-chainline crankset to fit the biggest gravel tires - Longer DUB crank spindle accommodates both Road- and MTB-width bottom bracket standards for unmatched cross-compatibility across brands - Compatible with 135mm, 142mm, and BOOST rear spacing - BB not included

Designed to handle whatever you can throw at it. Aluminum crankarms in a wide range of lengths and the DUB bottom bracket system mean the Rival crankset will keep spinning, no matter what. A tight and consistent 13-tooth gap between chainrings makes for accurate and dependable shifting. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability, simplicity, and virtually universal frame compatibility - BB not included

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

With an anatomic cut-out shape and advanced technology, materials and craft, Aliante R3 Open is a performance road saddle for riders who want a waved saddle profile and a pressure relief channel. Made for riders with low body flexibility and high pelvic rotation while pedaling, the Aliante is a waved profile saddle, with support and flexibility so you can ride in comfortable support and always get the power down. Aliante R3 Open has a light, strong, corrosion-resistant K:ium rail. A Comfort Core foam layer beneath the neat, durable Microtex cover provides comfort, which is enhanced by the full anatomic cut-out that avoids pressure on the rider’s sensitive soft tissue and ensures that all weight is correctly supported across the whole surface of the saddle. Like all performance fi’zi:k road saddles, Aliante R3 Open is light, flexible and agile. - Open central cutaway - Carbon-reinforced nylon shell - 7mm k:ium rails - Microtex cover - Integrated Clip System compatible Regular - Dimensions: 278mm x 142mm - Weight: 235g Large - Dimensions: 278mm x 153mm - Weight: 245g

A tough, tubeless-compatible 26-inch disc wheelset in traditional non-boost thru-axle spacing. - Pinned construction double-wall rim with a 24mm internal width, tubeless compatibility, and offset/asymmetrical construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1123g

A tough, tubeless-compatible 29-inch disc wheelset in new-school boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1230g

A tough, tubeless-compatible 27.5-inch disc wheel built around Center Lock hubs but shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 956g

A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adaptors for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1003g

A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1141g

This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.

The reliable rim with an ideal price-to-performance ratio! A state-of-the-art, high-quality aluminum rim, making for the perfect upgrade on any road bike. That is what the new RR 421 rim is all about. The welded rim supports wider tires and still offers a super-lightweight wheel build-up.

This rim can take heavy loads and cope with demanding surfaces at the same time! Are you searching for a pair of rims to ride off the beaten path? If so, the RR481 may be the perfect option for you. With an inner width of 22mm and approved up to a 130kg system weight, this extremely durable rim is made for rough, off-road rides. Whether you mount them on your Cyclocross bike, your gravel racer, or for your next bike-packing trip, the RR 481 won't let you down.

As versatile as it is robust—a rim for all surfaces! Anyone wanting to build a reliable, super-stiff wheel is starting in the right place with the RR 511. Thanks to a state-of-the-art alloy and surface treatment, this extremely robust 32mm high semi-aero rim is lighter than you would think. And, those thinking of using it on Gravel or Cyclocross courses can easily install tubeless tires.

An unexpected rough section on your ride? No problem with this rim. Looking for a bomb-proof rim to build up your Gravel, Cyclocross, or adventure bike? Then it's definitely worth taking a look at the RR 521 rim. 32mm deep and 20mm wide, this modern road rim could have been classified as a Cross Country rim just a few years ago. Nowadays it's just a great offer to widen your ride... with drop bars.

The Surge pedals feature CNC'd construction, a low-profile design, sealed bearing/bushing construction and a full set of replaceable pins. - 6066-T6 alloy CNC body, chromoly axle - Replaceable pins - Extremely strong pedal body with recessed spindle cap - Extra pack replaceable pins & nylon impact ring - 9/16"

Seated pressure relief for male road cyclists. The new SR Pro Men has a flat contour, yet still is comfortably padded. The overall shape and the relief channel with its deep cut-out perfectly match the male anatomy in a low, forward-tilted riding position typical of road cycling. The highly sensitive perineal area is effectively unloaded, preventing any discomfort. OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset forces and is also more durable and lighter than gel.

Fizik's Arione Versus combines their revolutionary Spine Concept fitting technology with a pressure relief channel for high-mileage comfort. The carbon-reinforced Wing Flex shell moves with the rider's pedal stroke, offering unmatched comfort and an exceptional fit, while the deep center channel reduces pressure on sensitive tissue and nerves. And, as always, it boasts the features and quality you expect from a Fizik: a Microtex cover with efficiency-enhancing thigh glides, light, strong Kium rails, and supportive, comfortable padding for on-the-road comfort.

VENTO ARGO R3 is a performance racing saddle with a short-nose design that improves stability and allows for a more aggressive, aero riding position. Where a traditional saddle shape encourages riders to shift their position frequently for better leverage, Argo puts the rider in a more planted position, making for greater stability and better weight distribution. Vento Argo's short length allows the rider to sit further forward without placing undue pressure on sensitive tissues. It also features an ergonomic cutout that was developed using detailed pressure analysis and input from medical experts. Argo is our most versatile saddle shape and each version suits different riding styles. As the racing option, Vento Argo has been engineered to deliver a riding feel that suits race bikes with aggressive geometry. The padding is made from fizik's proprietary Type 1 foam formulation, which has a lower profile and is reactive and springy for instantaneous response and optimal power transfer. The purposeful shape of its design helps you achieve a better riding posture: the dropped nose supports the pubic ramus when the pelvis rotates forward to add power or to get more aero. Argo is a product of the fizik Concepts program, a cross-disciplinary collaboration of leading industry experts and academics carrying out research and analysis on technology, design, physiology, and bike-fitting in search of ways to improve cycling performance. - Argo: a versatile short-nose saddle that encourages stability and relieves pressure on soft tissue area - R3: a combination of a ride-compliant carbon-reinforced nylon shell and a Kium hollow rail with a high strength-to-weight ratio - Type 1 foam: low-profile, reactive and springy for efficient power transfer SPECIFICATIONS: VENTO ARGO R3 140 - Length: 265mm - Width: 140mm - Weight: 213g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm SPECIFICATIONS: VENTO ARGO R3 150 - Length: 265mm - Width: 150mm - Weight: 220g - Height at 75mm width: 45mm - Length from nose to 75mm width: 114mm - Rail: 7 x 7mm

The X-TRACK RACE CARBON pedals offer the best surface contact area-to-weight ratio, thanks to a carbon body design. The large surface area and shape also offers plenty of stability to ensure a consistent feeling pedal stroke. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Carbon - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 175g - Weight (pair + cleats): 400g - Float angle: 6° - Release angle: 13°

THE FAT BIKE TIRE. - Extremely light. - The large volume can be ridden with extremely low air pressure. - Ideal on deep soils, rough and very loose terrain. - Available in widths of 100, 110 or 120 millimetres

Shimano, SP41, 4mm Shifter housing, 50m

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

Shimano, SLR brake housing, 40m, Black

The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

- The next generation in SPANK’s mountain bike rims with a built in vibration damping system. - Low sectional profile height and high width adds radial compliance while keeping high lateral stiffness and torsional strength. Features - Radially Compliant Gravity Rim with Vibrocore - Oohbah Inverted Inner Wall, BeadBite anti-burp - Optimized for DH, FR, and Heavy Enduro - Tubeless Ready

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier, and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

Based on the legendary Flow EX, the new Flow EX3 rim features Tiebeam, an internal reinforcement that offers unmatched impact resistance and the best air retention of any tubeless rim. The Flow EX3 combines the incredibly durable Tiebeam design of Stan's classic Flow EX with the 29mm internal width and 6069 aluminum construction of the popular Flow MK3 to create an entirely new rim built to handle today's faster, heavier and more capable enduro, downhill and e-bikes. - Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie-beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires

The SunRace MX 11-Speed Cassette is a wide-ratio cassette designed for XD driver bodies. - Largest sprocket crafted from A7075 aluminum - Black chrome finish - 460% range - Cassette Body Type: SRAM XD 11/12 Speed - Drivetrain Speeds: 11 - Weight: 502 g