Cyclo-ordinateurs

To reach your maximum potential as a cyclist, it's a great idea to train with a power meter, and the Quarq RIKEN brings together excellent accuracy and performance in a wireless, crank-based unit. It uses ANT+ wireless technology to pair with a head unit of your choice (sold separately), to display and record your ride data. Plus, an LED indicator lets you know you've correctly synced the RIKEN with your head unit. And, the user-replaceable battery is a simple to swap and readily available CR2032. With the RIKEN's excellent accuracy you get extremely useful data, even if you swap chainrings, thanks to Quarq's Omnical technology. Plus, the SRAM-made carbon crankarms and 5-bolt precision-shifting chainrings will leave you floored by their unreal stiffness and beauty.

Consistency and accuracy in training lead to better results, which is why using a consistently accurate and reliable power meter is vital. Quarq power meters using Quarq technology, measure power at the crankset spider. This the best place on the bike to measure power because all of your pedaling effort flows directly through the spider and it can be measured with great precision. Quarq's Active Temperature Compensation, which is calibrated with over 10,000 data points, makes their ELSA RS Power Meter Crankset accurate to within 1.5% (strain gauges benefit from accurate temperature). Plus the ELSA RS is specifically designed to match Shimano's 4-bolt Hollowglide chainrings for a seamless junction between ring and chassis. Quarq's Exogram Hollow Carbon crankarms deliver every watt to the road while keeping the weight incredibly low. ANT+ technology lets you hook up your desired compatible head unit, the LED indicator flashes when the power meter is on, and the single, easily-replaced CR2032 battery lasts for up to 300 hours of ride time. - Compatible with 11-speed Shimano chainrings (Dura-Ace, Ultegra, and 105) - Chainrings and bottom bracket are sold separately - Requires ANT+ head unit (sold separately) - 616 grams (GXP, 172.5mm) - Battery life: 300 hours

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE

The new Gen 3 Stages Power meter is built onto a Shimano Dura-Ace R9100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelorometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Consistency in training leads to better results, which is why using a consistently accurate and reliable power meter is vital. Quarq's Active Temperature Compensation, which is calibrated with over 10,000 data points, makes their ELSA R accurate to within 1.5%. Carbon crankarms deliver the power to the road and keep the Riken light on the climbs. ANT+ technology lets you hook up your desired compatible head unit (sold separately), the LED indicator flashes when the power meter is on, and the single, easily replaced CR2032 battery lasts for up to 300 hours of ride time. - Compatible with 10/11-speed SRAM, Shimano (10-speed only) Rotor, FSA, Praxis, WickWerks, and other chainrings - Chainrings and bottom bracket are sold separately - 130 BCD

Every innovation in Quarq’s next-generation DZero platform is channeled into DFour: 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the new Qalvin BLE app. The DFour91 is designed for Shimano’s Dura-Ace R9100 chainrings. It uses Quarq’s lightweight, sturdy ExogramTM carbon crank arms. GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. - DFour is designed for Dura-Ace 9000 chainrings and compatible with Ultegra 6800 and 105 5800 chainrings - DFour91 is designed for Dura-Ace R9100 chainrings - Must be paired with a compatible SRAM bottom bracket - 8-bolt power meter owners can upgrade using a DFour or DFour91 power meter spider - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery — CR2032, 200-hour battery life, change without tools - OmniCal — swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy — within 1.5%, measuring both legs - Chainrings and bottom bracket sold separately

The crankset is the heart of your bicycle and where you’ll find the SRAM RED Quarq power meter. The sole job of the crankset is to convert the effort from both legs to forward motion. It is the perfect place to measure power. This power meter works for every discipline: Road, triathlon, time trial, and cyclo-cross. The chainrings are replaceable should your bike, discipline, or ability change. - A direct force power meter that measures total power output from both legs with +/-1.5% accuracy - Works for every discipline: Road, triathlon, time trial, and cyclo-cross - No compromises on materials, shifting, wheels, or pedal choice - Proven by pro teams and athletes throughout the world – Cobbled Classics, Giro d’Italia, Tour de France, Vuelta a España, World Championships - Number 1 at the Ironman World Championship for the last three years - Uses a hidden bolt to mount the chainrings – compatible SRAM chainrings ensure the derailment pin lines up behind the crank arm - 10K – programmed with over 10,000 data points to eliminate temperature effects on power measurement - AxCad – A multi-axis accelerometer switches the power meter on and measures cadence, simplifying installation and operation - Breakthrough Materials – Exogram hollow carbon fiber crank arms – the lightest, strongest crank arms SRAM makes – minimize weight and maximize speed [ELSA RS, ELSA R and SRAM RED] - Easy to use (and reuse) – LED indicator and visible ANT+ ID - The replaceable CR2032 battery never leaves you without power - Manual and automatic zeroing make it truly set and forget - Built to Last – IPX7 waterproof rating, 2-year warranty, free firmware updates, and acclaimed international support - Moves with you from bike to bike - With Quarq's free Qalvin app – available for Windows, Mac, iOS and Android – you can set the zero offset, check battery voltage, run diagnostics, and perform firmware updates for free Arm Material: Carbon arms, Machined alloy spider Weight: 778 grams (GXP 172.5mm 53x39 BB not included) * Chainrings and BB sold separately

Garmin brings power to the pedal with the Vector 2. Built in conjunction with Look Keo pedals, the Vector offers precise power measurement in a rugged, ultra-convenient, discreet package. Garmin encased sensitive strain gauges inside the stainless steel pedal spindles for years of durability and accuracy to within +/- 2%. The Vector is essentially two separate power meters and measures power from both legs, meaning you have the data to correct discrepancies between your left and right sides. Now you can eke out those last few watts and maximize your pedaling economy. The robust Vector 2S pods are easy to mount, and have a status light indicating when they're on and pairing occurs. Switching the pedals and pods between bikes is blissfully hassle-free and takes less time than getting kitted up. The pedal bodies are built of tough, light carbon, while the battery/ANT+ pods hang protected beneath the crank arms. At a nimble 312 grams including pedal weight, the Vector is one of the lightest power meters available. The standard pedal pods fit crank arms 12–15mm thick and 38mm wide. The large pedal pods fit crank arms 15–18mm thick and up to 44mm wide. - Battery Life: 175 hours - Powered by user-replaceable 2032 coin cell batteries - Total weight of pedals/pods: 358 grams - Includes ANT+ USB stick and Look Keo 6-degree cleats - ANT+ wireless compatible - Compatible devices: fenix 2 Special Edition, fenix 2, Edge 1000, Edge 500, Edge 510, Edge 800, Edge 810, Forerunner 310XT, Forerunner 910XT, Forerunner 920XT - Featured metrics: Left/right % power balance average at various time intervals, Overall kilojoules, Total power in watts, Intensity Factor (IF), Normalized Power (NP), Power Zones, Cadence, Training Stress Score (TSS), Power: average at various time intervals

Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth

- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB

The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

You’re an athlete, and this is your watch. The Forerunner 945 running watch lets you sync with premium music services to put your songs on your wrist when paired with a compatible smartphone (may require premium subscription). It also offers our most advanced physiological features, including training load balance and more. Also enjoy the convenience of quick, contactless payments solution (available for supported cards from participating banks) from the wrist with Garmin Pay. With full-color, onboard maps to guide you on your run, you’ll never get lost during a workout. Wherever you go, built-in safety and tracking features — such as incident detection (during select activities), which sends you send your real-time location to emergency contacts through your paired compatible smartphone. Take Your Music on the Go Take your favorite music with you when you’re on the run. Sync your carefully crafted playlists from select premium music streaming services such as Deezer, Spotify and more for ad-free listening. You can store up to 1,000 songs right on your watch and transfer music from your own computer library as well. Then queue up your favorite playlist for easy listening through headphones enabled with BLUETOOTH technology. Maximize Performance Forerunner 945 monitors your performance and even offers personalized insight, so you can train smarter, not harder. The smartwatch tracks your VO2 max and adjusts the value based on heat and altitude. Training status evaluates your recent exercise history and performance indicators to let you know if you’re training productively, peaking or overreaching. See how your workouts influence the development of endurance, speed and power with aerobic and anaerobic training effect feedback. Recovery time helps you maximize the benefit of your efforts by predicting when you will be ready for your next tough challenge. You can even view your overall training load, which measures your exercise volume from the last 7 days and compares it to the optimal range for your fitness and recent training history. And — new for Forerunner 945 — training load focus sorts your recent training history into different categories based on activity structure and intensity. An Easier Way to Pay The Forerunner 945 GPS smartwatch features Garmin Pay, which lets you pay for purchases with your watch. Use it just about anywhere you can tap your card to pay. Now you can leave your wallet behind without missing out on that post-run caffè latte. Just tap and go. Maps on Your Wrist Whether you’re running the city streets or riding densely covered trails, Forerunner 945 provides built-in mapping to help keep you on track. Full-color mapping comes preloaded with map data optimized for at-a-glance navigation and location tracking. And the device also features Trendline popularity routing, which uses billions of miles of Garmin Connect data to help you find and follow the best trails and routes. Stay Connected and Secure With Forerunner 945, you can head out for a training session without being out of touch. Once paired with your compatible smartphone, you’ll be able to receive text messages and see social media updates, emails and more right on your wrist. And safety and tracking features make it easy to share your location with chosen contacts in case you need assistance — manually, or automatically with built-in incident detection. - Premium GPS running/triathlon smartwatch with music - Sync music from select premium streaming services when paired with a compatible smartphone (may require premium subscription), or store up to 1,000 songs on your watch, and connect with headphones (sold separately) enabled with BLUETOOTH technology for phone-free listening - Performance monitoring features include VO2 max and training status with adjustments for heat, altitude acclimation status, training load focus, recovery time, and aerobic and anaerobic training effects - Garmin Pay contactless payment solution (available for supported cards from participating banks) lets you make convenient payments with your watch so you can leave your cash and cards at home - Full-color, onboard maps guide you on your run so you never get lost during your workout - Safety and tracking features include incident detection (during select activities) which sends your real-time location to emergency contacts through your paired compatible smartphone - Battery life: up to 2 weeks in smartwatch mode, 10 hours in GPS mode with music or up to 60 hours in UltraTrac mode

Explore your world and your limits with Edge 1030 Plus. Never stop cycling with the ultimate GPS bike computer. Edge 1030 Plus is ready for any ride, from remote gravel trails to epic climbs. - Sync indoor or outdoor workouts right to your Edge. That’s the easy part. - Coach me. Edge suggests rides and workouts based on your current training load. - No matter how far you ride, Edge will show you the way back to start. - It has more ways to help you stay in touch, including inReach compatibility. - Get your texts and use your favorite cycling apps on this connected bike computer. - Ride farther, charge less. Get 24 hours of battery life. In the box: - Edge 1030 Plus - HRM-Dual - Cadence sensor - Speed sensor - Mounts (standard and flush out-front) - USB cable - Tether - Manuals

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace 7710 Track crank arm. Track Specific. Designed to meet the specific requirements of fixed gear track bikes, the Stages Power meter is the go-to choice for track racers at the World, Olympic and elite amateur levels. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power R meter is built on to a driveside Shimano Dura-Ace R9100 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The Garmin Edge 1030 is the ultimate GPS bike computer with navigation and connected features. - 3.5-inch bike computer with comprehensive navigation, performance and cycling awareness features - Trendline popularity routing uses billions of miles of Garmin Connect ride data to show the best on- and off-road routes - Preloaded Garmin Cycle Map provides turn-by-turn directions and new navigation alerts - New rider-to-rider messaging lets you stay in contact with other cyclists in your group - Challenge yourself every ride with newly updated preloaded Strava Live Segments feature - Battery life: up to 20 hours, extendable up to 40 hours with the optional Garmin Charge power pack General Specs: - Physical dimensions: 58 x 114 x 19 - Weight: 123 g - Water rating: IPX7 - Battery: rechargeable lithium-ion - Touchscreen - Display size: 3.5" (88.9 mm) - Display resolution: 282 x 470 pixels - Color display - Battery life: up to 20 hours In The Box: - Edge 1030 - Premium heart rate monitor - Cadence sensor - Speed sensor - Mounts (standard and extended out-front) - USB cable - Tether - Manuals

When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero Spider represents the state of the art in power meter technology Meet the Quarq DZero Power Meter Spider—the DZero in spider form. Ready to pair with any Quarq Prime Power ready cranksets. - Bluetooth low energy technology and ANT+ wireless data transfer - 10K Temperature Compensation - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5%

Explore your world and your limits with Edge 1030 Plus. Never stop cycling with the ultimate GPS bike computer. Edge 1030 Plus is ready for any ride, from remote gravel trails to epic climbs. - Sync indoor or outdoor workouts right to your Edge. That’s the easy part. - Coach me. Edge suggests rides and workouts based on your current training load. - No matter how far you ride, Edge will show you the way back to start. - It has more ways to help you stay in touch, including inReach compatibility. - Get your texts and use your favorite cycling apps on this connected bike computer. - Ride farther, charge less. Get 24 hours of battery life. In the box: - Edge 1030 Plus - Mounts (standard and flush out-front) - USB cable - Tether - Manuals

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Simply put, Garmin’s 920XT is like having a personal coach next to you for every workout you log. All the training tools this coach possesses fit into a sleek, lightweight sport watch that can be worn all day. Just push a button on the 920 to change the mode from swimming or cycling to running. Pull on your cap and goggles, and most importantly, grab your Garmin. It tells you when to push off the wall, and should you lose track of how many laps you've completed, it lets you know that your set is over. There are even alerts for calories, pace, and stroke rate. With the 920 on your wrist, you’ll quickly boost your swimming strength and efficiency. On the bike, this Garmin is compatible with sensors such as speed, cadence, and heart rate to provide advanced training information for your cycling workouts. Pair it with a power meter and you’ll have power metrics to dial in your efforts, an estimate of your VO2 max so you can see improvements in your fitness, and a comparison of yourself against other athletes in your age group for a little extra motivation. And while running, with its Virtual Partner, Virtual Racer, Auto Lap, auto pause, time/distance alerts, and interval training mode, you’re bound to have a focused run workout. Wear it with the included Garmin HRM-Run monitor and you’ll also be able to zero in on your running technique, view your estimated VO2 max, and look at race time predictions. You know that transitions in racing are important, but it is also crucial that you move seamlessly between training and your daily life. That’s why Garmin includes smart notifications that let you see your emails, texts, and other alerts when the 920 is paired with a smartphone. It automatically uploads to Garmin Connect so you can quickly see your stats and invite others to track your accomplishments live. Plus, it gives you a complete picture of your day by measuring your steps, sleep, and calories burned. Train smart so you can race hard!

You’re an athlete, and this is your watch. The Forerunner 945 running watch lets you sync with premium music services to put your songs on your wrist when paired with a compatible smartphone (may require premium subscription). It also offers our most advanced physiological features, including training load balance and more. Also enjoy the convenience of quick, contactless payments solution (available for supported cards from participating banks) from the wrist with Garmin Pay. With full-color, onboard maps to guide you on your run, you’ll never get lost during a workout. Wherever you go, built-in safety and tracking features — such as incident detection (during select activities), which sends you send your real-time location to emergency contacts through your paired compatible smartphone. Take Your Music on the Go Take your favorite music with you when you’re on the run. Sync your carefully crafted playlists from select premium music streaming services such as Deezer, Spotify and more for ad-free listening. You can store up to 1,000 songs right on your watch and transfer music from your own computer library as well. Then queue up your favorite playlist for easy listening through headphones enabled with BLUETOOTH technology. Maximize Performance Forerunner 945 monitors your performance and even offers personalized insight, so you can train smarter, not harder. The smartwatch tracks your VO2 max and adjusts the value based on heat and altitude. Training status evaluates your recent exercise history and performance indicators to let you know if you’re training productively, peaking or overreaching. See how your workouts influence the development of endurance, speed and power with aerobic and anaerobic training effect feedback. Recovery time helps you maximize the benefit of your efforts by predicting when you will be ready for your next tough challenge. You can even view your overall training load, which measures your exercise volume from the last 7 days and compares it to the optimal range for your fitness and recent training history. And — new for Forerunner 945 — training load focus sorts your recent training history into different categories based on activity structure and intensity. An Easier Way to Pay The Forerunner 945 GPS smartwatch features Garmin Pay, which lets you pay for purchases with your watch. Use it just about anywhere you can tap your card to pay. Now you can leave your wallet behind without missing out on that post-run caffè latte. Just tap and go. Maps on Your Wrist Whether you’re running the city streets or riding densely covered trails, Forerunner 945 provides built-in mapping to help keep you on track. Full-color mapping comes preloaded with map data optimized for at-a-glance navigation and location tracking. And the device also features Trendline popularity routing, which uses billions of miles of Garmin Connect data to help you find and follow the best trails and routes. Stay Connected and Secure With Forerunner 945, you can head out for a training session without being out of touch. Once paired with your compatible smartphone, you’ll be able to receive text messages and see social media updates, emails and more right on your wrist. And safety and tracking features make it easy to share your location with chosen contacts in case you need assistance — manually, or automatically with built-in incident detection. Track More Than Ever Before For such a lightweight watch, you’ll be surprised by everything Forerunner 945 can track. It features multinetwork (GPS, GLONASS and Galileo) satellite reception to track in more challenging environments than GPS alone. It features wrist-based heart rate4 and a wrist-based Pulse Ox sensor5 which monitors blood oxygen saturation levels to support advanced sleep monitoring and altitude acclimation. - Premium GPS running/triathlon smartwatch with music - Sync music from select premium streaming services when paired with a compatible smartphone (may require premium subscription), or store up to 1,000 songs on your watch, and connect with headphones (sold separately) enabled with BLUETOOTH technology for phone-free listening - Performance monitoring features include VO2 max and training status with adjustments for heat, altitude acclimation status, training load focus, recovery time, and aerobic and anaerobic training effects - Garmin Pay contactless payment solution (available for supported cards from participating banks) lets you make convenient payments with your watch so you can leave your cash and cards at home - Full-color, onboard maps guide you on your run so you never get lost during your workout - Safety and tracking features include incident detection (during select activities) which sends your real-time location to emergency contacts through your paired compatible smartphone - Battery life: up to 2 weeks in smartwatch mode, 10 hours in GPS mode with music or up to 60 hours in UltraTrac mode

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The DFour DUB was designed specifically for Dura-Ace R9100 chainrings. Train using a Quarq power meter without changing your drivetrain. You are working hard, pushing yourself to new heights in some of the toughest conditions. Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DFour DUB power meter is made for. Train harder, ride faster, and unlock your ultimate potential. The DFour DUB power meter brings simplicity and ease-of-use to your training. With MagicZero automatic calibration, there is no need to worry about calibrating before you ride; just jump on your bike and go. DFour DUB features Bluetooth low-energy and ANT+ wireless data transfer, delivering power output information directly to your cycling computer. Features - Bluetooth low-energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad - no cadence magnet required - 10K Temperature Compensation - Battery - CR2032, 200-hour battery life, change without tools - OmniCal - swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy - within 1.5%, measuring both legs

The Garmin Edge 1030 is the ultimate GPS bike computer with navigation and connected features. - 3.5-inch bike computer with comprehensive navigation, performance and cycling awareness features - Trendline popularity routing uses billions of miles of Garmin Connect ride data to show the best on- and off-road routes - Preloaded Garmin Cycle Map provides turn-by-turn directions and new navigation alerts - New rider-to-rider messaging lets you stay in contact with other cyclists in your group - Challenge yourself every ride with newly updated preloaded Strava Live Segments feature - Battery life: up to 20 hours, extendable up to 40 hours with the optional Garmin Charge power pack General Specs: - Physical dimensions: 58 x 114 x 19 - Weight: 123 g - Water rating: IPX7 - Battery: rechargeable lithium-ion - Touchscreen - Display size: 3.5" (88.9 mm) - Display resolution: 282 x 470 pixels - Color display - Battery life: up to 20 hours In The Box: - Edge 1030 - Mounts (standard and extended out-front) - USB cable - Tether - Manuals

Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon crank arm and it compatible with SRAM GXP MTB drivetrains (168mm Q-factor). Stages Power MTB. Power isn't just for roadies. Stages Power meters are ridden by world and national champions in every discipline of cycling. From weekend warriors to BMC Factory Racing, Trek Factory Racing XC and Olympian Chloe Woodruff, Stages Power for MTB is ridden by the best athletes in the world. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano DXR M71 crank arm. BMX: Stages Power is proud to support and provide power for those racing BMX. No matter your discipline, Stages is here to help take your riding to the next level. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Saint M820/M825 crank arm. Stages Power for DH. From the death defying rides of the Atherton's, Danny Hart and Jill Kintner, Stages Power is the tool to help anyone explore their best. For downhill bike riders we offer a Stages Power meter available as a power meter only non-drive crank arm for existing Shimano Saint cranks. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide