Filter By:

  • Show More Brands
  • Show Fewer Brands

Guidons

TruVativ Descendant Carbon Riser Handlebar
$273.99
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise, and wide - Weight: 230g
Race Face SixC 35 Handlebar
$264.99
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control
Pro Tharsis XC Riser Handlebar
$244.99
- Lightweight UD carbon construction - Cuttable bar-ends - Matte carbon finishing - Weight 173g - 740mm wide - 31.8mm clamp diameter - 15mm rise
TruVativ Descendant Downhill Carbon Riser Handlebar
$243.99
Combine a proven shape, proven width, proven materials you’ve got the Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. - Stiff, precise and wide - Weight: 240g - Material: Carbon
Bontrager Kovee XXX Carbon 35 MTB Handlebar
$239.99
Trek's lightest MTB handlebar offers an oversized 35mm clamp diameter that adds strength and saves weight. - Oversized 35mm clamp diameter offers increased strength and minimal weight - OCLV Carbon construction is the benchmark for durability and light weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - Trim Lines allow personalized fit
TruVativ Descendant Carbon Flat Handlebar
$235.99
Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort. - Material: Carbon fiber - Width: 750mm - Backsweep: 7-degrees - Bar Clamp Diameter: 31.8mm - Colors: Black
TruVativ Descendant Carbon Riser Handlebar
$235.99
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
Profile Design V2 Plus Aluminum
$229.99
V2 Plus Aerobars with S-bend extensions offer a higher rise for comfort and reduced fatigue in the aero position. The aerobar features a low stack armrest position and forged bracket system that places the extension below the basebar. - F-19 adjustable anatomic armrests with 4 position fore/aft adjustment to dial in the fit, and Velcro-backed EVA foam pads that affix directly to armrest without straps - L1 Brackets: 6061-T6 Aluminum forged bracket system designed to place the armrest at the lowest stack possible and the extensions underneath the basebar Tech specs: - Extension: V2+ Aluminum - Stack: 35mm - Reach: -90mm, -75mm, -60mm, -45mm - Width: 150mm - 305mm - Extension Adjustment: 175mm – 130mm - Clamp: Fits 26.0mm and 31.8mm bars - Weight: 490g
Profile Design T1+ Clip-on Aerobars
$225.99
Profile's T1+ Clip-on Aerobars feature Stryke-bend extensions with length, width and arm-rest adjustment so you can easily achieve your perfect aero position. The 6061 aluminum extensions keep weight down, while the forged brackets provide strength exactly where you need it. You'll get fast and stay there thanks to J2 brackets for an adjustable lower arm position, giving you an edge over your competition whether it's other racers or your own personal record.
Profile Design T4+ Clip-on Aerobars
$225.99
Profile's T4+ Clip-on Aerobars are made of light and durable 6061 aluminum and feature ski-bend extensions with length, width and armrest adjustments so you can easily find a perfect aero position. These clip-ons have Profile's J2 brackets for a low, aero arm position and their comfortable adjustable F-19 armrests.
Bontrager Line Pro Carbon 35 27.5mm Rise MTB Handlebar
$219.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Bontrager Line Pro Carbon 35 MTB Handlebar
$219.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Profile Design ZBS S-Bend Clip-on Aerobars
$205.99
Profile Design's ZBS S-Bend Clip-on Aerobars are made of light and durable 6061 aluminum and feature their ZBS brackets that provide a low arms position so this design is great for aggressive time trial and triathlon riding positions. It also boasts their F-19 adjustable anatomic armrests.
Profile Design Ozero Base Bar
$199.99
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
Profile Design T2+ Clip-on Aerobars
$199.99
Profile's T2+ Clip-on Aerobars feature length, width and arm-rest adjustment so you can easily achieve the perfect aero tuck. These fast bars also include internal cable routing to give you another edge over your competition, whether that competition is other racers or just besting your own personal record.
Thomson MTB Carbon Cross Country Handlebar
$199.99
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
Zipp Service Course SL-80 Handlebars
$142.00 - $165.99
Zipp’s Service Course SL-80 bars keep the drops close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Bontrager Kovee Pro Carbon 35 MTB Handlebar
$159.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - OCLV Carbon construction is the benchmark for durability and light weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
3T Ergonova Pro
$150.00
3T's Ergonova Pro Handlebar features a wider, flatter top section that provides more surface area for your hands. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Its triple-butted aluminum construction is lightweight and strong. Cable grooves on the underside provide a smooth feel when you're on the tops.
Zipp Service Course SL-70 Handlebars
$140.99 - $150.00
Zipp’s Service Course SL-70 bars let you dial in the perfect fit. A short reach to the brake hoods and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff and light for uncompromising strength and climbing prowess, these aluminum bars are ready for anything.
Bontrager Race Lite Clip-On Aerobars S-Bend
$149.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Spank Oozy Trail 760 Vibrocore Bar
$127.99 - $149.99
Whether its safety, price, or environmental responsibility, alloy has always been a favorite of many mountain bikers for bars. However, it wasn't until SPANK Industries introduced its patented Vibrocore anti-vibration technology that means alloy bars could match the stiffness, comfort and lightweight of carbon bars. The OOZY Trail 760 Vibrocore Bar is trail tuned and weight optimized in every way. Utilizing a special zirconium doped 7-series alloy blend, Dual XGT tapers, and SPANK's proprietary CNC Bending process, SPANK achieved a remarkably trim weight in a wide 760mm length. The Trail Tuned geometry positions the rider's weight slightly more forward to enhance traction on the front wheel. The OOZY Trail 760 Vibrocore Bar is the ultimate in trail handlebar for those seeking performance, comfort and unbeatable value. - Key Technologies: Vibrocore, Dual XGT, CNC Bending - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±245 (5mm) / ±250 (15mm) - Diameter (g): 31.8 - Rise (mm): 5 / 15 - Length (mm): 760 (Adjustable to 730) - Geometry (deg): 4° up x 6 ° back - Finish: Shotpeen anodized, decal logos - Discipline: Trail
Thomson MTB Aluminum Downhill Handlebars
$145.99
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
Thomson Trail Handlebar
$145.99
Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum
Salsa Cowbell 2 Bar
$137.99
Salsa's Cowbell 2 Bar offers a flat transition from bar to lever, therefore increasing comfort. It's made from double-butted 7050 aluminum for sprinting stiffness at a decent weight. The unique feature of this handlebar are the 12-degree flared drops—perfect for cyclocrossers and people who like the extra room to really torque the drops on a sprint or climb.
Salsa Cowchipper Drop Bar
$137.99
Salsa designed the Cowchipper to be the control center you want for road touring and long days on mixed surfaces. While the Cowchipper retains some resemblance of a traditional road bar, it takes a new approach by offering a radical 24° flare in the drops, and thus, boosts leverage and stability dramatically. - AL-7050-T6 construction - 24° flare in the drops - 120mm wide center section - 31.8mm bar clamp diameter - 96mm reach - 116mm drop - 40, 42, 44, and 46cm sizes available (measured center to center) - Aero bar compatible
Salsa Woodchipper 2 Bar
$137.50
Salsa's Woodchipper 2 Bar is a mix between road bars and mountain bars! They're called mountain drop bars, and are made from 7075 aluminum for a stiff, lightweight bar that rides just as hard as you do. The wide, angled drops flare out at 26 degrees, providing wide hand placement for plenty of control. The Woodchipper is designed for modern integrated STI levers or bar end shifters.
TruVativ Descendant Troy Lee Design Handlebar
$135.99
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
Profile Design Legacy II Aluminum Aerobar
$133.99
Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
Bontrager Elite IsoZone VR-CF Road Bar
$129.99
Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Soak up the chatter and ride on in comfort. - Custom-butted, 6066-T6 alloy construction - Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions - Compatible with clip-on aero bars - Shot-peened finish increases fatigue life - Laser-etched brake lever position lines for spot-on control setup